The Vaporesso Mini Target Premium Mod Kit 40W TC comes with a smaller version of the Target mod and the Vaporesso Guardian tank. While this kit is small, it will give you all the features that you can get from an advanced vaporizer. Not only does the Vaporesso Target Mini kit perform impressively, but it is also one of the most fashionable mini kits that you can get on the market today. You can get the Vaporesso Mini Target on Smokly for 
only $39.95. It is available in black, silver, gold, blue, and pink color.
The Vaporesso Target Mini Mod is very small with its dimensions at 36.5mm by 24,2m by 58.1mm. It is made of zinc alloy and stainless steel. On top of the mod, there is a threaded 510 connection. You can fit just about any atomizer with a diameter of 23mm or less on this mod without any overhang. The Target Mini comes with the same pistol grip design as its predecessor. It has a faux carbon fiber cover which makes it easier to fit the device in a grip.
The Target Mini mod does not have a removable battery feature. Instead, it comes with a built-in 1400mAh battery which can produce up to 40 watts. While this is low compared to some monster mods that you will find on the market, 40 watts will suffice to meet the needs of most vapers. The battery life of this device is not the most powerful. If you are not chain vaping, it could last you for a couple of hours. The kit includes a micro USB cable for charging the mod. The USB port is located under the device where you will also find some ventilation holes. The Target Mini supports pass-through so you can vape while it is charging.
There is a 0.49 inches OLED screen on the front of the mod. Right on top of the display, you will find three buttons for controlling the settings of the device. The mod can be used in 
power, wattage, temperature control, and TCR mode. It has a resistance range of 0.15 ohms to 5 ohms in wattage mode and a resistance range of 0.1 ohms to 1 ohm in temperature control mode. The overall resistance range of this mod is 0.15 ohms to 5 ohms. It has a temperature range of 100 to 315 degrees Celsius. You can use stainless steel, titanium, and nickel coil wires in temperature control mode. You can choose to vape between 5 watts to 40 watts. It can hit up to 9 volts in power mode. It has a lot of safety features like short circuit protection, overcharging protection, no atomizer protection, low voltage protection, and a 10-second cut-off limit.
The dimensions of the Vaporesso Guardian tank are 55mm by 22mm. It can hold 2ml of e-liquid. There are windows on the tank so that you can see the exact level of the e-liquid left. This means it can be used by vapers in the UK and Europe. The tank has a top filling design and a childproof locking feature. It is also leak-resistant. You have to remove the drip tip and top cap to get access to the top filling holes of the tank. The tank has a top airflow system. The adjustable airflow slots are located on the top cap.
You can use this device for either direct lung (DL) or mouth-to-lung (MTL) vaping. The Guardian tank comes pre-installed with a 0.5 ohms CCELL-GD SS ceramic coil head which is designed for DL hits. The drip tip that comes pre-installed with the tank is recommended for DL hits. There is an extra coil head in the package, a 1.4 ohms CCELL-GD coil head which is recommended for MTL vaping. There is an extra drip tip in the package which can be used for MTL vaping.
You can get both the Vaporesso Mini and the Revenger kit on Smokly as well as other impressive devices like the Smok Alien 220W Premium Mod Kit 220W TC.
